Get up to 50% Off Sitewide! Code: JUNESUN Ends: 6/20 Details

  1. Help
Get up to 50% Off Sitewide! Code: JUNESUN Ends: 6/20 Details


Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player.

STT STANCO - Page Text Content

1: Applications Introduction to CST Storage Chime Tanks Introduction to CST Storage Flat Panel Tanks Material Options Floor Options CST Covers - Knuckle Roofs CST Covers - Aluminum Geodesic Domes CST Covers - 1:12 Sloped Steel Roofs CST Covers - Externally Supported Roofs Nozzles and Accessories Oil and Gas Project Municipal Project STT Stanco Company History Contact Information | Table of Contents | 1 3 7 19 20 21 23 25 26 27 29 30 32 34

2: Applications - Potable water - Waste water - Fire protection -Petroleum and drilling fluids - Leachate storage - Clarifiers - Digesters | 1

3: 2

4: 3 | CST Storage (formerly Columbian TecTank) is the leading manufacturer of Municipal and Industrial liquid storage tanks. They are the world's leading manufacturer of above ground, bolted steel storage tanks. CST is one of only two manufacturers of API 12B tanks worldwide. | CST Storage Chime Tanks

5: Chime tank storage capacities range from 4,000 USG to over 3,600,000 USG in a single storage tank. There are many different size options to suit the specific job site. | 4

6: 5

7: A bolted “Chime” connection utilizes gaskets to effectively seal tank contents, regardless of fluid type, temperature and other variables. CST has a gasket system for the job! | Gasket Types Available Depending on Fluid & Temperature Viton Buna-N EPDM Epichlorohydrin Black Nitrile | Gasket Material | LIQUID ZONE | 6

8: CST Storage Flat Panel Tanks | 7

9: 8

10: 9

11: 10

12: 11

13: Flat panel tank storage capacities range from 4,000 USG to over 6,250,000 USG in a single storage tank. There are many different size options to suit the specific job site. | 12

14: Standard Mastic Sealant Information Properties Retained to -60C High Temperature Resistance (up to 150C) for Short Duration Certified to meet the NSF ANSI Standard 61 for Indirect Additives Other types of sealant available, depending on application. | Plastic Encapsulated Bold Head | Mastic Sealant | LIQUID ZONE | A bolted flat panel connection utilizes mastic to effectively seal tank contents, based on fluid type, temperature and other variables. CST has a mastic sealant for the job! | 13

15: 14

17: 16

18: 17

20: Glass fused to steel | Material Options | Stainless steel | 19 | Epoxy coated

21: Floor Options | Concrete - Embedded starter ring used | Steel floor | 20

22: Knuckle roofs have a proven life expectancy even in extremely demanding applications such as leachate tanks and digesters. With its origin over 60 years ago as a dry silo cover, the knuckle roof's application has greatly expanded to a variety of liquid and dry storage needs. For an economical cover for small diameter silos and tanks in an area of higher environmental loads, this type cover is hard to beat. | Economical For small diameters where static loads are minimal, a knuckle roof is the most economical cover. Easy of installation adds to the cost benefits of this type cover. Small Diameter Knuckle roofs are limited to 31 ft (9.5m) in diameter which makes them ideal for silo covers. Most sizes are pre-designed and have reduced manufacturing times. Higher Environmental Loads Unlike flat steel roofs, knuckle roofs have a high slope which minimizes the internal structural support. This makes knuckle roofs an ideal solution to silos and small diameter tanks in high snow load areas. Proven Design Having been integrated onto silos and tanks for over 60 years, there is a tremendous amount of field data validating the knuckle roof designs. Knuckle roofs have a proven life expectancy even in extremely demanding applications such as leachate tanks and digesters. Variety of Materials Knuckle roofs are predominantly manufactured in Vitrium glass-fused-to-steel, they can also be manufactured in stainless steel and other materials. CST's engineers can match the customer's needs with the material and design to meet the application requirements. | Roof Options Knuckle Roof | 21

23: 22

24: CST Covers is the worldwide leader in designing, manufacturing and constructing custom aluminum covers and structures for architectural, environmental and industrial applications. CST Covers was created by merging the proud traditions of Temcor and Conservatek, the two leading aluminum structure companies in the world. CST Industries acquired these companies in 2009 and 2010. | Roof Options Aluminum Geodesic Dome | 23

25: Corrosion Resistance Aluminum is inherently corrosion resistant versus other alloys. It will last the lifetime of the structure and will not need to be painted or repainted for protection from the atmosphere Low Lifetime Maintenance Cost With no corrosion or the need to repaint to protect the structure over time, there is little-to-no maintenance costs associated with an aluminum dome Clear-Span Capability Aluminum's lightweight characteristics allows for larger clear-span cover capability than structures utilizing steel, concrete and other materials Fast and Low Cost Construction Creative design and lightweight components provide for installation in 1/3 the time it takes to install other cover systems. Less time, labor and equipment needs combine for a low total cost of installation Design Flexibility Aluminum's excellent strength-to-weight ratios and creative component design yield covers and structures that cannot be achieved with other materials The dome's superior structural design gives it many advantages. Using proprietary variations of geodesic geometry, our domes are noted for their ability to meet exacting live load requirements by providing greater stiffness and strength, pound-for-pound, than any other dome geometry system. CST Covers domes have been designed for snow loads of up to 165 pounds per square foot and windloads of up to 150 mph. Our unique panel design is specifically engineered to support loads of up to 500 pounds on any one square foot. We have the ability to design domes up to 1000 feet in diameter. | 24

26: CST's supported and unsupported flat steel decks, or roofs, provide an economical solution to many liquid and dry containment needs where safe, regular access to accessories on the deck is desired. Supported and Unsupported Designs CST unsupported flat deck roofs are constructed up to 32 feet (9.8 m) and supported designs up to and beyond 100 feet (33.8 m) Supported decks can be supported by a single center column or contain multiple columns depending on the size and loading. | Roof Options 1:12 Sloped Steel | 25

27: Roof Options Externally Supported | - Higher loads - Ease of construction - Cost effective | 26 | - Unobstructed internal surface - Design pressure (6 kPa) - Design vacuum (-0.5 kPa)

28: Tank sidewall and roof nozzles can be factory or field located. Stanco’s preference is to have nozzles in the sidewall of the tank finalized at approval drawing stage so that nozzle cut outs can be made in the factory prior to coating of the tank panels. If field located, nozzle openings are coated using the manufacturer’s recommended field touch up procedure. Depending on nozzle size and sidewall thickness where nozzle will be located, you may require an additional nozzle reinforcing pad. | Nozzles and Accessories | - Gravity vents - Mixers - Ladders - Handrail - Stairway | - Level indicators - Immersion heaters - Cross-over platforms - Cathodic protection - Sidewall manways | Accessories | 27

29: Cross over platform & guardrail | Insulation & cladding around nozzle penetrations | Internal ladder | Piping & floor sump | Cladding | Spiral staircase | 28

30: Application Product Stored Tanks Storage Tank Capacity Location Date Installed | Potable designed for range: 6 to 8pH for ambient temperature. Fire Protection designed for range: 6 to 8pH for ambient temperature. Water (1) Potable Water Tank: 53.15’ diameter x 38.27’ high (1) Fire Water Tank: 53.15’ diameter x 38.27’ high Potable Water Tank: 635,165 USG, 2,404 m3 Fire Water Tank: 635,165 USG, 2,404 m3 Fort McMurrary, AB 2010 | Oil & Gas Project | 29

31: Municipal water Potable water (1) 69.94’diameter x 14.68’high, glass fused to steel water storage tank with concrete foundation. 378,671 USG, 1433 m3 useable capacity with 18” freeboard Gibsons, BC (2011) | Municipal Project | 30 | Application Product Stored Tank Storage Tank Capacity Location

35: STT Stanco History | Stanco Projects began selling Peabody TecTank epoxy coated bolt steel tanks in Western Canada. J&L Industrial is established and takes on Engineered Storage Products Company tank lines, which include: Harvestore®, SlurryStore®, Aquastore®, TecStore. Engineered Storage Products Company (ESPC) develops EDGECOATTM technology. ESPC develops cold climate glass (Vitrium coating with TiO2) Stanco Projects purchases J&L Industrial which adds glass-fused-to-steel tanks to their tank portfolio and Stanco Projects becomes the storage tank leader in Western Canada. Stanco Projects is the largest supplier of glass-fused-to-steel tank solutions in Western Canada. Stanco Projects becomes STT Stanco STT Stanco takes over competitor brands and expands product offerings in Western Canada. STT Stanco represents CST Storage and CST Covers which is the world’s largest supplier of bolted tanks and domes. STT Stanco moves further into the oil sands market and begins offering tanks that can be used to store SAGD (Steam Assisted Gravity Drain) site fluids | 1975 1985 1994 1997 2000 210 2011 2011 2012 | 32

37: Mike Greig Phone: 604-248-8069 Mobile: 604-644-5051 Email: Richmond: 12391 Horseshoe Way, Richmond, BC V7A 4X6 Canada Tel: +1 604-273-6441 | Fax: +1 604-273-0466 Milton: 8485 Parkhill Drive, Milton, ON, L9T 5E9 Canada Tel: +1 905-693-9301 | Fax: +1 905-693-9432

Sizes: mini|medium|large|gigantic
Default User
  • By: Jennie Y.
  • Joined: over 5 years ago
  • Published Mixbooks: 0
No contributors

About This Mixbook

  • Title: STT STANCO
  • Tags: None
  • Started: over 5 years ago
  • Updated: about 5 years ago